3mm Sheet

See More About:    Wisconsin Robin        Point Socket        Festo Electric        

Welcome to our website Woodturning Tools. You will discover here the honest product assessment you have been looking for about 3mm Sheet. Also please show your appreciation above by clicking one of the social media buttons for this website.

**Please Enable JavaScript to Navigate Thru Our Listings**
**Click Here for Instructions**

Didn"t find what your looking for? Search our real time inventory below...

3mm Sheet

See More About:    Thin Cut        Hard Sleeve        Margin Trowel        
DIY Vacuum Forming Machine 3mm Acrylic Sheet Prototyping Shop Built Home Made

How to Make an Easy Earring Stand

There many steps to follow in making home made jewelry.  There are however necklace and earring stands that will be straightforward to make. This article will show you the simple way to do that.  If you would rather purchase a stand then you can just keep an eye out for any jewelry display update that may be published in your fave magazine or online blog.  It your position is low then the stand below will do fine if you take it slow and make it correctly. 

The materials you will need are :

Different sorts of templates
Black/white foam core board
3mm box board sheet
Glue
Double-sided black tape ( 12mm wide )
Tube black acrylic paint
Paint brush
Thick card for your template
Stanley knife

The procedure :

1.  Print out the templates; re size it if you want with the employment of a photocopier. 

2.  Paste your template on your thick card using glue and cut out the shape. 

3.  Using a biro, trace the form of your template onto a foam core board.  Employ a Stanley knife to cut out the shapes ; if there's straight edges use a ruler. 

4.  The stand at the back of the template is mostly a bit shorter, so that the length from point to end should be 22cms.  Trace this shape onto the box board then cut it out.  For the earring stand, you can use the same template, just center the ruler thru the point and ran a line on each side of the ruler-3cms wide and nine cm.  Long. 

5.  Score a line after you finished cutting out the stand, about a centimeter down to make the bend.  You can refer the stand to a picture frame if you aren't sure about it. 

6.  Attach a bit of double sided tape to the 1cm block on the side which has already got a scored line.  This is going to be attached to the foam core. 

7.  Next you've got to bring them both together.  You will find it a bit of a juggle, but it is's ok.  Then line up the two bottom edges.  Don't fret if the stand will hang out a few millimeters, it truly does not matter because when it's standing upright, it won't be seen from the front.  After that, you can now attach the stand to the foam core on the other side of the tape. 

8.  Lastly, as the box board comes in a natural cardboard color, you have got to paint it to match the white or black, have it dry for 2 hours. 

Now you have your display unit you can showcase your jewelry items.  If you have just stumbled onto the current page and are not positive how to make any jewellery then there are numerous sites that offer easy tutorials on, how do I make a beaded snowflake, how do I make a toggle necklace etc?  Just doing a quick search on jewelry making will gives you tons of new jewelry pieces that you can make.

Here is a list of other products on Woodturning Tools, come check these out:

See More About:    Telescopic Antenna        Step Motor        Pipe Fittings        

Other Items People View After These Listings About